Discussion:
Run-Time Error -2147319779 (8002801d)
(too old to reply)
dshaplin
2006-03-21 15:19:36 UTC
Permalink
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered

Tried manual registration - didn't work.

Any help wloud be greatly appreciated.
Thanks
Zephanova
2006-03-26 22:48:43 UTC
Permalink
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
dshaplin
2006-03-28 16:49:01 UTC
Permalink
Thanks for taking the time to help me out. It worked great!
Post by Zephanova
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
telescope_jen
2006-04-04 22:54:02 UTC
Permalink
I'm having the same problem with FRx 6.7.4 on a Windows 2000 system. I've
tried the FRxReg.exe and it didn't help. I was going to try the fix below,
but the user in question already had full permissions. Any ideas?
Post by dshaplin
Thanks for taking the time to help me out. It worked great!
Post by Zephanova
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
dshaplin
2006-04-06 21:40:01 UTC
Permalink
My network user had full permissions also. I had to add the user to the Local
Machine with admin rights, then perform the regedit, adding the Local User
with full rights.
Post by telescope_jen
I'm having the same problem with FRx 6.7.4 on a Windows 2000 system. I've
tried the FRxReg.exe and it didn't help. I was going to try the fix below,
but the user in question already had full permissions. Any ideas?
Post by dshaplin
Thanks for taking the time to help me out. It worked great!
Post by Zephanova
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
Yuvraj Kumar
2008-11-16 14:51:01 UTC
Permalink
Hi there,

i am facing a problem with RIVA FLV PLAYER/ENCODER, everytime i try to open
them, it says "Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered". i tried many times to install, but no success. i
tried your trick, but here also no success. what's the issue? till now it was
working fine. i installed mediacoder 0.6. till that it was working fine. then
i installed a codec pack of the said and upto some time it worked fine. but
afterthat, i came to know about this problem. am worried. please help me out.
any help there will be appreciated. hope the best from your side.

Yuvi
Post by Zephanova
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
Punjaban
2010-07-13 04:17:39 UTC
Permalink
Post by Zephanova
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
Punjaban
2010-07-13 05:15:55 UTC
Permalink
I have the same problem but can't fix it because I have little knowledge of
computer.
I read your instruction but I don't even know when you are asking to go to
run where would I be able to find Run. Please help.
Post by Zephanova
I had same issue but have a bandade for you until I can figure out which reg
Key is the real issue.
1) Go to run
2) Type regedit
Be sure to backup registry before adding permissions
To backup Registry got to File
Click on Export
Export to a location for you to save
3) Right click on HKEY-CLASSES-ROOT
4) Click on Permissions
5) Click on Advance Button
6) Click on Add Button
Add the User Login Nameand give them full rights
7) Click on OK
8) Check the box by Replace permission entries on all child objects with
entries shown here that apply to child objects
9) Click on Apply and you should be all set
Post by dshaplin
FRx works fine if logged on to workstation as the System Administrator.
If logged on as user the following error occurs when launching FRx designer
Run-Time Error -2147319779 (8002801d)
Automation Error
Library not registered
Tried manual registration - didn't work.
Any help wloud be greatly appreciated.
Thanks
Continue reading on narkive:
Loading...